Lixon Power Project Private Limited

Brand: Edwards (EST Signature Series)

Model No.: SIGA-CT2

Product Type: Addressable Dual Input Module

Function: Monitors and transmits the status of two independent dry contact circuits to the fire alarm control panel

Supported Inputs: Two Class B (N.O.) initiating device circuits

Configurable Modes (Personality Codes): Alarm latching, alarm delayed, active non-latching, active latching, soft short latching (European style)

Addressing: Soft addressing (set electronically by the loop controller, no dip switches)

LED Indicators:

• Green flash — normal polling

• Red flash — alarm/active state

Electrical Specifications:

• Operating Voltage: 15.2 – 19.95 V DC (nominal 19 V)

• Standby Current: ~45 µA

• Alarm Current: ~700 µA

IDC Specifications:

• End-of-Line Resistor: 47 kΩ

• Max Circuit Resistance: 50 Ω (25 Ω per wire)

• Max Capacitance: 0.1 µF

Wiring & Mounting: Works with 12–18 AWG wires, installs into single-gang or 4″ square box

Operating Environment:

• Temperature: 0 °C to 49 °C

• Humidity: 0–93% RH, non-condensing

Certifications: UL 864, ULC-S527, EN54-18, CE Marked, LPCB approved

• Brand: Edwards (EST Signature Series)

• Model No.: SIGA-CC1 (Standard) / SIGA-MCC1 (UIO plug-in version)

• Product Type: Addressable Single Input Signal Module

• Function: Selects and connects supervised Class B circuits—either audible/visible notification appliances (24 VDC), audio evacuation speakers (25 or 70 VRMS), or firefighter telephone circuits—upon command from loop controller

• Personality Codes:

  • Code 5: Signal power output (Class B riser selector—audio or notification)

  • Code 6: Telephone three-state with onboard ring-tone generator

  • Code 26: Telephone four-state—detects off-hook and trouble

• Addressing: Soft-addressed electronically by the loop controller; no dip switches or manual settings

• LED Indicators:

  • Green flash: Normal (polling)

  • Red flash: Alarm/active state

• Electrical Specs:

  • Operating Voltage: 15.2–19.95 V DC (nominal 19 V)

  • Standby Current: Approximately 310 µA

• Output Ratings: Up to 2 A at 24 V DC for desk-type circuits

• Wiring & Mounting:

  • Supports 12–18 AWG (0.75–2.5 mm²) wire

  • Mounts in a two-gang, 2½″ deep or 4″ square box for standard versions

  • Plug-in UIO version installs onto motherboard boards for modular configurations

• Environmental Specs:

  • Operating Temperature: 0 °C to 49 °C (32 °F to 120 °F)

  • Operating Humidity: 0% to 93%, non-condensing

• Certifications & Features:

  • UL 864, ULC-S527, EN 54-18 compliant

  • Intelligent module with microprocessor, automatic device mapping, ground fault detection, and nonvolatile memory for maintenance info

Brand: Edwards (Genesis LED G1 Series)

Model No.: G1AVRF

Product Type: Compact Wall-Mounted Horn-Strobe (Audible + Visual Notification)

Strobe Output: Field-selectable 15, 30, or 75 candela (cd) LED light

Horn Output: Selectable high or low dB, supports Temporal (T3) or steady tone

Design: Ultra-low-profile—protrudes only about 1 inch from mounting surface, with no visible screws

Mounting: Fits standard single-gang electrical box; optional trim ring available for 4-inch boxes

Visual Markings: Quick-swap “FIRE” legends available in English, French (“FEU”), Spanish (“FUEGO”), or without marking

Installation Features: Under-cover diagnostic test points, slide switches for configuration, and 12–18 AWG in/out screw terminals for fast wiring

Current Draw: Uses highly efficient LED optics, enabling lower current consumption and compatibility with legacy Xenon strobes on the same circuit

Synchronisation: Devices can be synchronized within NFPA 72 requirements when used with compatible NAC circuits

Dimensions & Weight: Approx. 5″ × 3.5″ × 2.5″; weight ~0.4 lbs

Usage: Ideal for both retrofit and new installations in commercial and industrial settings

Brand: Edwards (EST Signature Series)

Model No.: SIGA-CR (standard mount) / SIGA-MCR (UIO plug-in mount)

Product Type: Addressable Control Relay Module

Function: Provides one Form-C dry relay contact (NO/NC) to control external appliances such as door closers, fans, dampers, etc.

Installation Options:

• SIGA-CR: Standard 1-gang mount, compatible with deep 1-gang or 4″ square boxes

• SIGA-MCR: Plug-and-play UIO version for modular assemblies

Addressing: Electronically assigned by loop controller—no manual switches or dials required

Intelligent Features: Microprocessor ensures relay follows panel commands; supports automatic device mapping and ground fault detection at module level

Electrical Specifications:

• Operating Voltage: 15.2–19.95 V DC (nominal 19 V DC)

• Operating Current: ~75 µA in standby, ~75 µA when active

• Contact Rating: 2 A @ 24 V DC (pilot duty), 0.5 A @ 120 V AC (0.25 A @ 220 V AC, non-UL)

Indicators: On-board LEDs—green flash when polled; red flash when in alarm/active state

Compatibility: Exclusive for use with Edwards Signature Loop Controllers (EST3, EST3X, iO Series)

Agency Listings: UL, ULC, CSFM, MEA

Mounting & Wiring: Accepts 12–18 AWG wires; supports automatic mapping of position on loop

Dimensions & Weight: Standard mount ~0.15 kg; UIO plug-in ~0.08 kg