Lixon Power Project Private Limited

Brand: Honeywell Morley-IAS

Model No.: HM-PTSE-AP

Product Type: Addressable Multi-Criteria Detector (Photoelectric + Thermal)

Certifications: EN54-7 (smoke), EN54-5 (58 °C thermal), LPCB, RoHS

LED Indicators: Dual red LEDs—360° visibility

Mounting Base: Plug-in with B501AP intelligent detector base (white, PC/ABS)

Height: ~61 mm (with base)

Diameter: ~102 mm (with base)

Weight: ~99 g (with base)

Terminal Wire Capacity: Up to 2.5 mm²

Voltage Range: 15–32 V DC

Standby Current: ~260 µA (idle); ~310 µA (LED blink)

LED Current: ~3.5 mA

Remote Output: 22.5 V DC @ ~10.8 mA

Loop Resistance (B501AP base): ~20 mΩ typical (max 30 mΩ)

Operating Conditions: –30 °C to +70 °C; 10–93% RH (non-condensing)

Features: Advanced smoothing to reduce false alarms, rotary addressing, washable filter for hygiene, modern ivory design

Brand: Morley-IAS (Honeywell)

Model No.: ZX2Se

Product Type: Intelligent, Analogue Addressable Fire Alarm Control Panel

Loop Capacity: Supports 1 to 2 detection loops

Device Support per Loop: Up to 126 devices per loop for Apollo, Hochiki, or Nittan protocols; or up to 99 sensors + 99 modules per loop for Morley-IAS or System Sensor protocols

User Interface:
  • 4-line alphanumeric LCD display for detailed device, fault, and fire event messages
  • Dedicated keypad with YES/NO/CHANGE/ENTER/SHIFT keys for configuration
  • LED indicators for system status: Fire, Fault, Disablement, Alarm Silence, Power, etc.

Access Levels: Three levels of user access
  • Level 1: Basic operations (alarm silence, power, etc.)
  • Level 2: Passcode protected; allows test, output control, etc.
  • Level 3: Installer / programmer access; full configuration and programming rights

Networking: Can be networked with other ZXSe panels (up to 99 panels) using a robust network protocol

Compatibility: Works with addressable smoke, heat detectors, manual call points, sounders, modules from major manufacturers and supports all major protocols (Apollo, Hochiki, Morley-IAS, Nittan, System Sensor)

Programming Features:
  • Autolearn device discovery
  • Cause & effect programming for zones, outputs, delays
  • Walk-test mode with selective zone test without triggering full system alarm
  • Event log & fault diagnostics; optional printer or remote display supported

Physical / Environmental Specifications:
  • Enclosure dimensions: ~400 mm × 400 mm × 135 mm (HxWxD)
  • Colour / Finish: RAL 9002 / Grey-white steel enclosure
  • Operating Temperature: 0 °C to +40 °C
  • Humidity: up to 85% RH non-condensing

Certifications & Compliance: Complies with EN54-2 (fire alarm control and indicating equipment) & EN54-4 (power supply requirements)

Brand: Honeywell Morley-IAS

Model No.: HM-MCP-GLASS-AP

Product Type: Addressable Break-Glass Manual Call Point

Addressing: Rotary decade switch (01–159, factory default “00” = fault)

Communication: Analogue addressable with “Plug & Play” installation concept

Standards: Fully compliant with EN54-Part 11

LED Indicator: Panel-controlled RED LED — blinks when polled, steady red during alarm

Material: PC/ABS housing

Dimensions:

• Semi-flush: 89 × 93 × 27.5 mm (W × H × D)

• Surface: 89 × 93 × 59.5 mm (W × H × D)

Weight:

• Flush mount: ~130 g

• Surface mount: ~180 g

Ingress Protection: IP24D (dust and splash resistant)

Operating Temperature: –10 °C to +55 °C

Operating Humidity: 10% to 93% RH, non-condensing

Electrical Specs:

• Voltage: 15–32 V DC

• Quiescent Current: ~80 µA @ 24 V

• Alarm Current: ~130 µA @ 24 V

Brand: Honeywell Morley-IAS

Model No.: HM-PSE-AP

Product Type: Addressable Photoelectric Smoke Detector

Certifications: EN54-7, EN54-17, LPCB, RoHS compliant

LED Indicators: Dual red LEDs with 360° visibility

Mounting Base: Compatible with B501AP intelligent base (plug-in type)

Dimensions: Height ~52 mm; Diameter ~102 mm (with base)

Weight: ~97 g (with base)

Terminal Capacity: Up to 2.5 mm² cable

Housing: Ivory/white, PC/ABS fire-resistant material

Operating Voltage Range: 15–32 V DC

Standby Current: ~260 µA (idle); ~310 µA (with LED blink)

LED Current: ~3.5 mA @ 24 V DC

Remote Output (Alarm): 22.5 V DC @ ~10.8 mA

Loop Resistance (with base): ~20 mΩ typical; max 30 mΩ

Operating Temperature: –30 °C to +70 °C

Operating Humidity: 10% to 93% RH, non-condensing