Lixon Power Project Private Limited

• 🔹 Highlighted Specifications — Ravel RE-25SS Sounder cum Strobe

  • Brand: Ravel

  • Model No.: RE-25SS

  • Product Type: Sounder cum Strobe (Audible + Visual Notification Device)

  • Operating Voltage Range: 18 to 30 V DC (nominal 24 V)

  • Current Consumption: ≤ 100 mA @ 24 V DC

  • Sound Output: 80 to 100 dB @ 1 meter (varies by tone)

  • Flash Rate: 60 flashes per minute (1 Hz xenon tube)

  • Tone Options: 3 selectable field tones (Ambulance, Fire truck, Police car)

  • Material / Housing: Flame retardant ABS plastic

  • Color: Red

  • Mounting Options: Ceiling, flush or surface wall mount

  • Dimensions: 125 mm (W) × 125 mm (H) × 47 mm (D)

  • Operating Temperature Range: –10 °C to +50 °C

  • Relative Humidity: ≤ 95% non-condensing

  • IP Rating: IP40

  • Compliance / Standards: NFPA 72 compliant, CE certified, RoHS compliant

UL listed Monitor Module is applicable to monitor any third party devices integration to monitor the change of state from Normally open to normally close.Having supervisory feature to supervise the circuit connected with third party system having RED colored LED for status indications with 8 digit Dip switch for address settings.

Operating Voltage	:	24 VDC Nominal.
Alarm Current	:	2.7 mA Max.(Latched)
Standby Current	:	0.7 mA
End of Line Resistor	:	47K Ohms
Communication Line Loop Impedance	:	40 Ohms
IDC wiring Resistance	:	100 Ohms Max.
IDC Voltage	:	8 V Max.
Temperature Range	:	0°C to 49°C / 32°- 120°F
Humidity	:	93 ± 2% RH (non-condensing) at 32 ±2° C / 90 ±3° F

Zone interface module used to connect the conventional smoke,heat and multi sensor detector to addressable fire alarm control panels also the module is used to integrate with Beam detectors to addressable fire alarm system.Shall have RED colored LED for status indications with 8 digit DIP switch for address settings.

• EN54-11 Approved Type A Indoor Use.
• Re-Settable by an element kit.
• Suitable for flush or surface mounting
• Module Addressing by 8 way DIP Switches.
• Low Standby Current.

• Operating Voltage	:	24VDC.
  Power-up surge current	:	0.8mA
  Quiescent Current	:	0.5mA.
  Alarm Current	:	5.8mA

• Temperature	:	0 49 C
  Relative Humidity	:	0 93% non-condensing
  Connection	:	2.5mm2 Max.
  Weight	:	125g.
  IP Rating	:	IP 53
  Dimension	:	92mm X 92mm X 48 mm

   

The isolator module to be installed between every 16 nos. of devices to isolate the circuit from single short circuit on the analogue addressable loop cable, this is non addressable device with yellow LED for status indications.

It includes microcontroller-based electronics with built-in supervision and LED indication for normal, active, and fault conditions. The unit can be programmed with a unique address and easily mounted inside junction boxes or enclosures. Designed for professional installations, it meets key fire-safety and performance requirements in Indian commercial and industrial projects.

Applications:

• Emergency door or shutter release control

• Elevator recall and shutdown interface

• Integration of HVAC, gas, or suppression systems

• Commercial, institutional, and industrial fire-alarm systems

Key Features:

• Intelligent addressable relay module for RE-700 Series panels

• One Form-C (SPDT) relay contact for control functions

• LED indicators for normal, alarm, and fault status

• Microprocessor-based digital communication and supervision

• Compact design for wall or box mounting

• Low power consumption from loop supply

• Plug-in terminal blocks for easy wiring

• Field-programmable address setting

• Supports automatic status feedback to control panel

Technical Specifications:

• Operating Voltage: 24 V DC (loop powered)

• Relay Contact Rating: 2 A @ 30 V DC (resistive)

• Communication: Two-wire addressable loop

• LED Indication: Normal – Green, Active – Red, Fault – Amber

• Operating Temperature: 0 °C to 49 °C

• Humidity: Up to 93 % RH (non-condensing)

• Mounting: Standard electrical back box

• Wiring Terminals: Up to 2.5 mm² conductor

Benefits:

• Provides reliable control of external fire-safety devices

• Reduces wiring complexity and installation time

• Offers visual LED status for quick maintenance

• Compact and robust construction for long service life

• Enhances integration and automation within addressable systems

• Ideal for contractors and integrators requiring flexible system control

About Lixon Power Project Pvt Ltd:
Based in Noida (Delhi NCR), Lixon Power Project Pvt Ltd is a trusted supplier and system integrator of leading fire-safety brands including Ravel, Honeywell, Notifier, Edwards, Simplex and GST.
We specialize in Supply, Installation, Testing & Commissioning (SITC) of intelligent addressable fire-alarm systems across India, ensuring quality, compliance, and safety.

We Provide:

• Genuine Ravel RE-717MR modules

• Pan-India supply and service support

• AMC and integration solutions

• GST-compliant invoicing and export assistance

Model: RE-717MR
Brand: Ravel Electronics
Supplier: Lixon Power Project Pvt Ltd, Noida (Delhi NCR, India)

Keywords:
Ravel RE-717MR, addressable relay module India, Ravel control relay module, fire alarm interface device, Ravel fire system accessory, addressable loop module, Lixon Power Noida, Ravel RE-700 series module, fire safety relay India

UL Listed Analogue addressable smoke detector with 8 digit dip switches for ( 1 to 254) address settings,Dual LED indication for 360 degree visibility ,milky white in color,shall be polarity insensitive, Insect filter chamber, easy to install, advanced detection and communication protocol.

UL Listed Analogue addressable Multi Sensor detector with smoke detector and the combination of heat detector with fixed temperature of 59 degree Centigrade and Rate of raise facility of 11.1.Deg C /min with 8 digit dip switches for ( 1 to 254) address settings. Dual LED indication for 360 degree visibility, milky white in color, shall be polarity insensitive, easy to install, advanced detection and communication protocol with insect filter chamber.

UL Listed Analogue addressable Heat detector with fixed temperature of 59 degree Centigrade and Rate of raise facility of 11.1.Deg C /min with 8 digit dip switches for ( 1 to 254) address settings,Dual LED indication for 360 degree visibility ,milky white in colour,shall be polarity insensitive.easy to install,advanced detection and communication protocol.

The microprocessor based UL listed 8 Zone conventional fire alarm control panel, the system has 16 X 2 LCD character, 8 zones detection circuit,3 common potential free contacts &2 common NAC sounder output, inbuilt Rs-485 for repeater connectivity, wall/ceiling mounted, Switch mode power supply- SMPS & Battery polarity & Deep discharge protection.

RE-2558 fire alarm control panel is designed with unique protocol to be used for small & medium establishments, Schools, hospitals, hotels, banks, residential / commercial building, and small scale industries. The system is user friendly with includes all standard to ensure ease for use and high reliability.

The microprocessor based CE mark 12 Zone conventional fire alarm control panel, the system has 20 X 4 LCDcharacter with alpha numeric touch key pad, 12 zones detection circuit, 3 common programmable potential free contacts & 2 common NAC sounder output, inbuilt Rs-485 for Networking – TCP/IP, peer to peer & repeater connectivity, central monitoring facility, inbuilt RTC with Event logs, wall/ceiling mounted, Switch mode power supply- SMPS & Battery polarity & Deep discharge protection.

RE-900 Series fire alarm control panel is designed with unique protocol to be used for small, medium & Large establishments, Schools, hospitals, hotels, banks, residential / commercial building, and small scale industries. The system is user friendly with includes all standard to ensure ease for use and high reliability.

The microprocessor based 2 Zone CE mark conventional fire alarm control panel is a standalone system, with 16 X 2 LCDcharacter, 2 zones detection circuit,3 common potential free contacts & a common NAC sounder output, wall/ceiling mounted, Switch mode power supply- SMPS & Battery polarity & Deep discharge protection.

RE-102 fire alarm control panel is designed with unique protocol to be used for small commercial building and small scale industries. The system is user friendly with includes all standard to ensure ease for use and high reliability.

The microprocessor based 2 Zone CE mark conventional fire alarm control panel is a standalone system, with 16 X 2 LCDcharacter, 2 zones detection circuit,3 common potential free contacts & a common NAC sounder output, wall/ceiling mounted, Switch mode power supply- SMPS & Battery polarity & Deep discharge protection.

RE-102 fire alarm control panel is designed with unique protocol to be used for small commercial building and small scale industries. The system is user friendly with includes all standard to ensure ease for use and high reliability.

We are Authorized Associate Partner of Ravel  make Fire Alarm & Detection System which are designed to service the Residential, Commercial & Industrial application. We are offering Conventional & Addressable Fire Alarm System that includes Fire Alarm Panel, Repeater Panel, Smoke Detector, Heat Detector, Manual Call Points, Hooter, Fire Alarm Cables etc.These Fire Alarm System made of best advanced technology & meeting International Standards & Certifications like UL,CE etc considering Safety & Security into account.These systems are easy to install, reliable, long service life & having superior quality.

Our Quality Policy :
: Best Quality Products
: Cost Effective Solution
: Technical Assistance
: Customer Satisfaction
: Building Customer Loyalty
: Long Term Association

• UL listed
• Dual LED’s for 360° visibility
• Advanced detection and communication protocol
• Easy installation and maintenance
• Sleek low-profile housing design
• Regular 100mm base

UL Listed Analogue addressable smoke detector with 8 digit dip switches for ( 1 to 254) address settings,Dual LED indication for 360 degree visibility ,milky white in color,shall be polarity insensitive, Insect filter chamber, easy to install, advanced detection and communication protocol.

Features

• Complies with EN 54.
• Dual LEDs for 360 visibility.
• Advanced detection and communication protocol.
• Stable photoelectric smoke sensing chamber. No adjustment or replacement required
• Polarity insensitive.
• Easy installation and maintenance.
• Sleek low-profile housing design.
• Regular 100mm base.
• Simple Soft address programming for Easy installation.

The microprocessor based 4 Zone CE mark conventional fire alarm control panel is a standalone system, with 16 X 2 LCDcharacter, 4 zones detection circuit,3 common potential free contacts & a common NAC sounder output, wall/ceiling mounted, Switch mode power supply- SMPS & Battery polarity & Deep discharge protection.

RE-104 fire alarm control panel is designed with unique protocol to be used for small commercial building and small scale industries. The system is user friendly with includes all standard to ensure ease for use and high reliability.

• Wall or Ceiling mountable
• Mini Horn with BackBox
• 24VDC Operation
• They are used in Fire, Burglar & Emergency Alarm System.

• UL listed
• Dual LED’s for 360° visibility
• Advanced detection and communication protocol
• Easy installation and maintenance
• Sleek low-profile housing design
• Regular 100mm base

Product Specification MaterialABSMounting TypeSurface MountedSound Level85 dBModel Name/NumberRE-24CSOperating Temperature0 to 49 Degree CBrandRavelShapeRectangleOperating Voltage24 VOperating Current40 mASounder TypePiezo Electric TypeDimensions96 X 76 X 28 mmMinimum Order Quantity100 Piece Product Description
Due to our proficiency of this field, we are engaged in presenting Ravel Fire Alarm Hooter. We are presenting these products to customers within given time-frame.

Details:

Slim and Sleek

Wall or Ceiling mountable

Mini Horn with BackBox

They are used in Fire, Burglar & Emergency Alarm System.

Additional Information Delivery TimeREADY STOCK

We are the leading provider of RE-716P-1t Ravel Manual Pull Stations.  These products are identified amid patrons for their noticeable features such as longer life, durability and nominal cost.

• Lift and pull
• Break glass cover
• Weather and Explosion proof versions(optional).
• All stations offer hex screw or key lock access

• Indian Manufacturer – International standard.
• UL Certified (9th Edition)
• Touch Keypad for user friendly operation.
• Inbuilt USB.
• Universal Switched Mode Power Supply.
• Modular Construction, Serviceability.
• Networkable.
• Auto Resettable Fuse.
• Surge Protection.
• Battery polarity protection.
• 32 Bit processor.
• Unique protocol feature for fast alarm response.
• Inbuilt conventional circuit.
• Auto learning facility.
• 1016 Devices of any combination per panel.
• Multi protocol.
• Peer to Peer Networking.
• Redundancy : If the main CPU fails, it will raise an alarm like conventional panel.
• User friendly circuit.
• Device / Detector wise configuration facility.
• 2000 Event Storage with Real Time Clock.
• Upto 192 grouping facility.
• Pre Alarm Action.
• All field wiring are power limited and supervised.
• Programmable detector sensitivity.
• Device type verification.
• Earth fault annunciation facility at 0 ohms.
• Double Address Sensing.
• Loop wise device test .
• 40 X 4 Characters LCD display
• Maximum 4 numbers of loop card with Class A, Style 5,6 or 7 and Class B Style 4 wiring
• Maximum 254 devices (any combination) per loop.
• Day / Night Mode facility.
• USB 2.0 Interface for PC connectivity (A to B Type).
• RS 485 Communication facility for Network / Repeater/ MODBUS / BACnet.
• Programmable Auto Silence Facility / AC Loss Delay / Silence Inhibit.
• Two no’s of programmable inputs.
• Battery low audio, visual warning.
• Three programmable Form C relay for Fire, Fault and Supervisory.

UL Listed Control Module to integrate with Conventional Audible devices like Sounder,Sounder cum strobe,strobe,bell etc., Also having supervisory features for NAC circuit as well as the power supply input.Capable to connect multiple notification devices in single module having RED colored LED for status indications with 8 digit Dip switch for address settings.

We are the leading provider of RE-716P-1t Ravel Manual Pull Stations.  These products are identified amid patrons for their noticeable features such as longer life, durability and nominal cost.

• Lift and pull
• Break glass cover
• Weather and Explosion proof versions(optional).
• All stations offer hex screw or key lock access

Product SpecificationSystem ComponentsGas Sapresion PanelProduct TypeAGENT GAS RELEASE PANELUsage/ApplicationCommercialBrandRavelTypeConventionalZones4 ZONEBody MaterialM S BodyNumber Of Zones4 ZONESNo Of Relays3Model Name/NumberRE-25AROperating Voltage14 - 21 V DCAlarm Current15 - 30 mAShort Circuit Current45 mALoop Resistance100 ohmsOperating Temperature0 to 49 Degree CRelative Humidity93%IP RatingIP50Minimum Order Quantity1 PieceProduct Description
We are an accomplished organization which has gained name and fame in providing Ravel 4 Zone Gas Release Panel to the customers.

Additional InformationItem CodeRE-25AR

1. Electrical Specification

Yes! I am interested

X

Product Videos

WSO-PR-N05 Honeywell Morley Addressable Loop Sounder

Get Quote

EST Smoke Detector Siga-PD

Get Quote

System Sensor SYS-HS Wall-Mount Horn-Strobe

Get Quote

Contact Us

Shubham Dubey (CEO AND FOUNDER)
Lixon Power Project Private Limited
A-36 Sector 63
Noida - 201301, Gautam Buddha Nagar, Uttar Pradesh, India

Get Directions

Send Email

Share:

Mr. Ms. Mrs. Dr.

Describe Your Requirement Please enter requirement.