Lixon Power Project Private Limited

🔹 Highlighted Specifications — Simplex 4090-9002 Relay IAM

• Brand: Simplex (Tyco)

• Model No.: 4090-9002

• Product Type: Addressable Relay Module (IAM)

• Function: Provides control and status of a remote Form-C relay contact; reports state back to fire alarm control panel

• Communication Protocol: IDNet addressable communications (single address for module)

• Relay Contact Type: Form-C (SPDT) – Normally Open, Normally Closed, Common

• Contact Ratings:

  • 2 A @ 24 V DC (resistive, power-limited suppressed loads)

  • 1 A @ 24 V DC (inductive loads)

  • 0.5 A @ 120 V AC (non power-limited, resistive)

• Power Source: Powered by IDNet communications line (no separate power needed)

• LED Indicator: Visible LED flashes to indicate valid communications; optional trim plate available for surface or semi-flush mount to view LED after installation

• Wire Connections: Screw terminals; supports wire sizes 18 to 14 AWG (≈ 0.82 to 2.08 mm²)

• Mounting: Designed to fit a 4-inch square electrical box; optional covers/trim plates for surface or semi-flush installation

• Dimensions: 105 mm × 105 mm × 35 mm (approx. 4 1/8″ × 4 1/8″ × 1 3/8″)

• Housing: Black thermoplastic enclosure; galvanized sheet metal mounting plate

• Operating Temperature: 0 °C to +49 °C (32 °F to 120 °F)

• Humidity Range: Up to 93% RH at 38 °C, non-condensing

• Certifications & Listings: UL 864, ULC, FM, CSFM; MEA (NYC) acceptance

Simplex 4099-9005 Addressable Manual Call Point (MCP / Pull Station)

The Simplex 4099-9005 is a dual-action, breakglass addressable manual call point (MCP / pull station) intended for use in advanced fire alarm systems. It combines the familiar manual call point housing with an integral Individual Addressable Module (IAM) that continuously monitors and communicates status to the control panel over IDNet or MAPNET II wiring.

When the glass is broken and the lever is pulled, the 4099-9005 activates the alarm switch and latches the lever outwards for visual indication of activation. The break-rod is replaceable if used. It is reset by a key after activation. It is suitable for indoor installations with typical operating conditions.

Uses / Applications
This manual call point is used in commercial, industrial, institutional, and public buildings where it is required to manually initiate a fire alarm. Typical locations include corridors, exit paths, stairwells, lobbies, atriums, and areas requiring emergency manual alarm initiation. It is ideal where addressability and intelligent system integration is required.

Key Features / Details
– Dual-action breakglass operation: hammer to break glass then pull lever to activate
– Integral addressable module (IAM) for communication with control panel
– Uses IDNet or MAPNET II protocols on a single wire pair for both data and power
– Screw terminals accept 14 to 18 AWG (0.82 mm² to 2.08 mm²) wires
– Operating temperature: 0 °C to 49 °C; humidity: up to 93% RH (non-condensing)
– Housing is red polycarbonate / Lexan, lever is white, with clear “FIRE ALARM PULL DOWN” marking
– ADA-compliant pull lever that protrudes when latched
– Tamper-resistant key reset (uses Simplex “B” key)
– Available mounting: surface, semi-flush, or with adapter kits
– Compatible backboxes: steel box 2975-9178, cast box 2975-9022, etc.

Benefits
– Provides manual initiation of fire alarms in a supervised addressable system
– Enhances safety by allowing occupants a way to trigger alarms manually
– Ensures integration into intelligent fire systems with status monitoring
– Visual latched lever helps maintenance and inspection
– Replaceable breakglass and key reset allows reuse after activation
– Supports multiple mounting styles for flexible installation
– Meets industry standards (UL Listed, FM, CSFM)

About Lixon Power Project Pvt Ltd
Based in Noida, Delhi NCR, India, Lixon Power Project Pvt Ltd is a leading supplier and systems integrator of fire safety and alarm equipment from global brands including Simplex, Notifier, Honeywell, Morley, GST, and more. We deliver SITC (Supply, Installation, Testing & Commissioning) solutions across India and exports. Our installations adhere to UL, EN-54, and other international standards, ensuring safety and compliance for our clients.

Model: 4099-9005 Brand: Simplex Supplier: Lixon Power Project Pvt Ltd, Noida Delhi NCR India

For bulk orders, AMC support, export queries, or system integration assistance, please contact Lixon Power Project Pvt Ltd – your trusted Simplex manual station and fire systems partner.

�� Highlighted Specifications — Simplex 4098-9793 Isolator Base

• Brand: Simplex (Tyco / Johnson Controls)

• Model No.: 4098-9793

• Product Type: IDNet Communications Isolator Base (for TrueAlarm analog sensors)

• Compatible Sensors: 4098-9714 (Photoelectric), 4098-9733 (Heat), 4098-9754 (Multi-Sensor)

• Function:

  • Provides communications-line isolation: automatically isolates shorted segments while allowing other devices to keep communicating

  • Assists in detecting earth faults via built-in diagnostics

• Wiring Type: Works with both Class B and Class A wiring

• Loop/Device Capacity: Can be installed up to ~250 total bases (lower for some panel types)

• Connections: Screw terminals for IDNet in and out; supports 14 to 18 AWG wiring

• Operating Temperature: −9 °C to +50 °C

• Storage Temperature: −18 °C to +60 °C

• Humidity Range: 10% to 95% RH, non-condensing

• Physical Dimensions: Diameter ~124 mm; Base height ~24 mm flush mount; deeper when surface mounted (adapter plate required)

• Box Requirements: 4-inch square or octagonal box, at least 1½-inch deep; adapter plates for shallow or surface boxes

• Color / Finish: Frost white finish

• Certifications & Listings: UL Standard 268, ULC Standard S529, CSFM, MEA accepted

The Simplex 4098-9789 is a high-quality addressable detector base designed for use with the Simplex TrueAlarm series of photoelectric and heat sensors. This base provides reliable electrical connectivity, strong mechanical support, and integral communication electronics to ensure consistent performance in fire detection systems.

The 4098-9789 base is compatible with Simplex IDNet and MAPNET II communication protocols, making it ideal for new installations and retrofit projects. It allows any TrueAlarm sensor head to be mounted and replaced easily, reducing maintenance time while maintaining system integrity. When connected to a Simplex fire alarm control panel, the base communicates sensor status updates every four seconds for precise monitoring and rapid response to alarms or faults.

Built from durable, heat-resistant materials, the 4098-9789 base includes secure locking features, polarity-insensitive wiring, and tamper-resistant installation options. Its intelligent design allows field interchangeability between smoke and heat sensors without reprogramming the system, providing flexibility during construction or service work.

Key Features
– Compatible with Simplex TrueAlarm intelligent sensors
– Supports IDNet and MAPNET II communication protocols
– Integral electronics for addressable operation
– Polarity-insensitive two-wire SLC connection
– LED indicator for alarm and status monitoring
– Allows sensor interchanging without reprogramming
– Anti-tamper locking tab to prevent unauthorized removal
– UL and EN-54 certified for global safety compliance
– Mounts on standard 4 inch electrical boxes
– Rugged and low-profile design for modern installations

Technical Details
Model Number: 4098-9789
– Type: Addressable Detector Base
– Compatible Sensors: 4098-9714 Smoke Detector, 4098-9733 Heat Detector, 4098-9754 Multisensor
– Communication Protocols: IDNet and MAPNET II
– Operating Voltage: 24 VDC nominal (from SLC loop)
– Communication Interval: 4 seconds
– Temperature Range: 0 °C to 49 °C
– Humidity Range: 10% to 93% RH non-condensing
– Mounting Type: Standard 4 inch octagonal or square junction box
– Dimensions: Approximately 11.4 cm diameter
– Material: Flame-retardant thermoplastic
– Weight: Approx. 150 grams
– Certifications: UL Listed and EN-54 Compliant
– Country of Origin: USA

Applications
The Simplex 4098-9789 base is suitable for use in addressable fire alarm systems installed in:
– Commercial buildings and offices
– Hospitals, schools, and public institutions
– Data centers and industrial facilities
– Hotels, malls, and large residential complexes

Benefits
– Ensures secure and stable connection between sensor and loop

About Lixon Power Project Pvt Ltd
Lixon Power Project Pvt Ltd is a leading distributor and integrator of Simplex, Notifier, Honeywell, Morley, GST, and other global fire protection brands. Based in Noida, Delhi NCR, we specialize in SITC (Supply, Installation, Testing & Commissioning) services for commercial, industrial, and institutional fire alarm projects across India and overseas. Our focus on quality, certified products, and on-time delivery ensures complete safety and compliance for every site.

Model: 4098-9789 Brand: Simplex Supplier: Lixon Power Project Pvt Ltd, Noida Delhi NCR India

For bulk orders, export enquiries, or project integration support, contact Lixon Power Project Pvt Ltd – your trusted Simplex fire alarm system supplier

Firstly, Simplex 2098-9808, Remote LED Alarm Indicator (below), provides a remote Red LED status indicator mounted on a single gang stainless steel plate. Also, both the 2098-9806 and 2098-9808 Remote status indicators mount in standard single gang boxes; 2” W x 3” H (51 mm x 76 mm) with a minimum depth of 2”, supplied separately

🔹 Highlighted Specifications — Simplex 4098-9733 Heat Sensor

• Brand: Simplex (Tyco / Johnson Controls)

• Model No.: 4098-9733

• Product Type: Intelligent Addressable Heat Detector (Analog)

• Sensing Modes: Rate-compensated fixed temperature sensing, with optional rate-of-rise sensing

• Selectable Fixed Temperatures: 135 °F (57 °C) or 155 °F (68 °C)

• Operating Temperature Range: 0 °C to 50 °C

• Humidity Range: 10% to 95% RH (non-condensing)

• Wiring / Communication: IDNet or MAPNET communication protocol

• LED / Remote Indicator Support: Supports remote LED indicator; compatible bases with remote LED wiring

• Self-Restoring: Returns to normal once ambient temperature drops below threshold

• Listings & Standards: UL-268 / ULC-S529

• Compatibility: Compatible with Simplex TrueAlarm control panels (4007ES, 4100ES, 4100U, etc.)

• Base / Mounting Options: Compatible with standard heat sensor bases (e.g., 4098-9792, 4098-9789)

• Type: Sensor only (head); base required for mounting and wiring

Simplex 4098-9792 TrueAlarm Sensor Base

The Simplex 4098-9792 is a reliable, high-performance addressable detector base designed for use with Simplex TrueAlarm photoelectric and heat sensors. It includes built-in electronics that communicate directly with the control panel, providing continuous supervision and fast response to any alarm or fault condition.

This base is part of the TrueAlarm family and is compatible with both IDNet and MAPNET II protocols, ensuring flexible integration with multiple Simplex fire alarm control panels. Its intelligent design digitizes sensor data at the base and sends an updated reading to the panel approximately every four seconds for maximum reliability.

The 4098-9792 base allows field replacement or interchanging of smoke and heat sensors without requiring system reprogramming, making it ideal for areas that require flexibility during maintenance or construction. When a sensor type is swapped, the panel automatically detects and adjusts the configuration for continuous operation.

Key Features
– Integral addressable electronics for sensor supervision
– Compatible with IDNet and MAPNET II communication protocols
– Supports both photoelectric and heat detectors
– Digitizes sensor output for precise, fast communication with control panel
– LED indicator pulses in normal mode and remains steady during alarm conditions
– Allows sensor interchanging without reprogramming
– Anti-tamper locking feature to prevent unauthorized removal
– Surface or flush mounting on standard 4-inch electrical boxes
– Compact low-profile design for modern installations
– UL and EN-54 certified for international safety standards

Technical Details
– Model Number: 4098-9792
– Type: Addressable Detector Base
– Compatible Sensors: 4098-9714 (smoke), 4098-9733 (heat), 4098-9754 (combination)
– Communication Protocols: IDNet / MAPNET II
– Operating Voltage: Provided via SLC loop (24 VDC nominal)
– Communication Interval: Every 4 seconds
– Mounting: Standard 4-inch square or octagonal electrical box
– Operating Temperature: 0 °C to 49 °C
– Humidity: 10 to 93 percent RH (non-condensing)
– Dimensions: Approximately 11.4 cm diameter
– Weight: Approximately 150 grams
– Certifications: UL Listed, EN-54 Compliant
– Color: Off-white polycarbonate housing

Applications
The Simplex 4098-9792 sensor base is used in commercial, industrial, and institutional buildings where addressable fire detection is required. Typical applications include offices, factories, hospitals, data centers, educational institutions, hotels, and public facilities. It provides a flexible and cost-effective solution for long-term fire protection projects.

Benefits
– Simplifies installation and maintenance with common base design

About Lixon Power Project Pvt Ltd
Lixon Power Project Pvt Ltd is a trusted supplier and distributor of Simplex, Honeywell, Notifier, Morley, GST, and other global fire protection brands. Based in Noida, Delhi NCR, we offer complete SITC (Supply, Installation, Testing and Commissioning) solutions for industrial and commercial projects across India and overseas. Our engineering team ensures every product meets UL and EN-54 standards for safety and compliance.

Model: 4098-9792 Brand: Simplex Supplier: Lixon Power Project Pvt Ltd, Noida Delhi NCR India

For bulk orders, project requirements, or export enquiries, contact Lixon Power Project Pvt Ltd – your trusted Simplex fire alarm system partner.

Simplex® compact air duct smoke sensor housings provide TrueAlarm operation for the detection of smoke in air conditioning or ventilating ducts. Sampling tubes (sold separately) are installed into the duct allowing air to be directed to the smoke sensor mounted in the housing. The Simplex 4098-9755 is a basic addressable sensor housing; operating power is supplied by either MAPNET II or IDNet communications (No relay output). A Simplex 4098-9714 sensor is included and installed in the housing. This duct housing is compatible with the Simplex 4010, 4020, 4100, 4100U, and 4120 fire alarm control panels. It is also compatible with the Simplex 2120 CDT if configured for MAPNET II, TrueAlarm operation.

IDNet or MAPNET II communications compatible Monitor ZAMs (Zone Adapter Modules) provide an addressable interface to a conventional initiating device circuit (IDC) Available for Class B or Class A IDCs:  4090-9101, Class B monitoring for 2-wire or 4-wire initiating devices, with power reset connections for 4-wire devices  4090-9106, Class A monitoring for 2-wire initiating devices  Zone device power is supplied separately (typically from fire alarm control panel)  Refer to device compatibility list on page 2 For use with the following Simplex® fire alarm control panels:  Model Series 4008, 4010, 4010ES, 4100ES, and 4100U fire alarm control panels using IDNet communications  Model Series 4100/4100U, 4120, 4020, and 2120 Communicating Device Transponders (CDTs) equipped with MAPNET II communications Compact, sealed construction:  Enclosed design minimizes dust infiltration  Mounts in standard 4” (102 mm) square electrical box  Screw terminals for wiring connections  Visible LED flashes to indicate communications  Optional covers are available to allow LED to be viewed after installation  UL listed to Standard 864

Simplex 4100ES The fully networkable Simplex 4100ES supports up to 3,000 points and is designed to handle the complex requirements of medium/large facilities and multi-building campus networks. It features addressable technology, scalable design flexibility, voice notification/audio capability and is listed for multi-hazard suppression release control. An optional touch screen display includes an intuitive interface that provides a wealth of information. Simplex 4010ES The addressable, fully networkable Simplex 4010ES supports up to 1,000 detectors, modules or manual stations – ideal for small- to mid-sized facilities. Labor-saving features available in all Simplex control units, such as device-level ground fault isolation and almost-dirty smoke sensor status reports, help minimize installation time and enable proactive maintenance while preventing nuisance alarms. An optional touch screen display with intuitive interface is available. Simplex 4007ES For smaller facilities seeking advanced Simplex capabilities, the addressable, fully networkable Simplex 4007ES delivers with a compact, cost-effective package. It features multi-hazard suppression release and an intuitive color touchscreen display. Since it’s UL cross-listed with most conventional control units, it can replace a conventional control unit with minimal cost and disruption. Simplex 4006 The Simplex 4006 is a conventional control unit that features a built-in DACT for easy connection to central station monitoring, a multi-function keypad and a 2x20 character display. It’s perfectly suited for facilities that require five to ten initiating device circuits and four notification appliance circuits. Simplex 4004R Designed specifically for suppression release operation, the Simplex 4004R allows you to choose and program a number of releasing sequences right at the control unit, so there’s no need for an off-line programming tool.

Carbon monoxide (CO) is an odorless, colorless, tasteless gas produced by the incomplete combustion of heating fuels such as wood, coal, heating oil, and natural gas. CO is also a byproduct of many materials experiencing unintentional fire or even incipient fire conditions. Monitoring of CO levels can warn of physically harmful concentrations, however, sensing of CO levels below the harmful level can also provide improved understanding of incipient fire conditions when evaluated in combination with photoelectric fire sensor information from the same location. Simplex® CO sensor bases combine an electrolytic CO sensing module with a TrueAlarm analog sensor to provide a single multiple sensing assembly using one system address. The CO sensor can be enabled/disabled, used in LED/Switch modes and custom control, and can be made public for communication across a fire alarm Network. CO sensor operation is similar to other TrueAlarm sensors (photoelectric or heat). It provides current analog values, average analog value, “No Answer� troubles, “Wrong Device� troubles, over threshold, concentration in ppm, and monitors for the presence of the CO sensor. Base mounted address selection allows the address to remain with its location when the sensor is removed for service or type change. Address access is from the front, under the removable sensor. An integral red LED indicates power-on by pulsing, or alarm or trouble when steady on, and also provides test mode status